-
- Some services are not accessible on a smartphone.
- Sign In
- My Account
- My Cart
- Customer Service
- Bindery Parts & Equipment | Finishing Parts Equipment | Bindery Supply>
- Brand Information - Update Ltd>
- Becker>
- Packaging>
- Pumps>
- Becker Pump Parts>
- DVT / KDT / KVT Series>
- Becker Original Vanes KDT/KVT 2.100/3.100 & DVT 2.100 (WN124-032) (Set of 4)
Becker Original Vanes KDT/KVT 2.100/3.100 & DVT 2.100 (WN124-032) (Set of 4)
Part Number: 90133300004
Becker Original pump vanes: 90133300004 | WN 124-032
For Becker pumps:
• KDT / KVT 2.100
• KDT / KVT 3.100
• DVT 2.100 (requires 2 sets / equivalent to part #90133300008)
Set of 4 carbon vanes
List price: $453.34 /SET
- Vane Dimensions : 250 x 39 x 4mm
- Availability: In stock
Maintenance
• Check for wear every 3,000 hours
• Replace vanes once they reach a minimum width of 26mm
• Make sure the beveled edge rides smoothly against the cylinder wall.
• Vane life depends mostly on temperature and vacuum level. Run the pump in an ambient environment with adequate air flow and a max temp. of 100°F.
• Keep dirt and debris off the pump and motor using compressed air every 2000 hours.
• Starting and stopping more than 3 times per hour will deteriorate vane life.
• Run the pump at the lowest acceptable pressure level.
* These intervals are basic guidelines. You may find either more or less frequent attention is needed, depending on your application.
Documents
Vane Check Guide | Maintenance Guide |