Challenge Drill Bit Jumbo 1" Steel
Double-tap and hold to zoom.
Mouse over the image to zoom.

Challenge Drill Bit Jumbo 1" Steel

Part Number: STJUMBO-C1

Challenge Jumbo (a.k.a. Paint Can) drill bits are compatible with Challenge MS-10 machines that have been converted to large hole drilling with the A-6500-7 kit. Select from a variety of sizes and styles below.
$300.00 /EACH
List price: $300.00 /EACH
    • EACH
  • Availability: Available to Order

Drill Bit Types

Steel: Uncoated steel drill bits will cover a majority of basic drilling applications - normal paper stock, light to medium weight.

CHT (Teflon): Teflon coated to prevent build-up and increase drill bit life by reducing heat. Works great for medium to heavy weight and coated stocks. 

Drilling Tips

Keep Drills Sharp: Sharpen drills every 4 to 8 hours of use - even more when drilling through hard or abrasive stock. Most breakages occur as a result of dull drills.

Keep Drills Clean: This is especially true when drilling perfect bound books and glue. If the inside of a drill is not cleaned, glue will harden and snap a drill bit upon next use. Use a small brush with solvent to clean the inside of the drill bit. Bits can also be lightly oiled to reduce rust or corrosion when not in use.

Keep Drills Lubricated: Some bits are coated (i.e., Teflon), which will provide lubrication. Consider using a lubricating stick to reduce heat and clogging.

You May Also Be Interested In

Drill-Ease Lubrication Stick
1x $3.25
12x $2.95
List price $3.25 /EACH
  • EACH
  • Availability: In stock
Challenge MS-10 Large Hole Conversion Kit (Hole Sizes 9/16" - 1.5")
  • $5,350.00 /EACH
  • List price $5,350.00 /EACH
  • EACH
  • Availability: Available to Order
Drill Blocks Challenge 3" x 3/4" Round, 1 Dozen
  • $27.45 /DOZ.
  • List price $27.45 /DOZ.
  • DOZ.
  • Availability: In stock
PTFE Dry Lubricant & Release Agent 10oz. Aerosol
1x $16.70
12x $15.03
List price $16.70 /EACH
  • EACH
  • Availability: In stock