Connect Here
-
- Some services are not accessible on a smartphone.
- Sign In
- My Account
- My Cart
- Customer Service
- Bindery Parts & Equipment | Finishing Parts Equipment | Bindery Supply>
- Catalog>
- Bindery & Finishing>
- Pumps>
- Becker Pump Parts>
- DT / T / VT Series>
- Becker Original Vanes DT/T/VT 3.10/4.10 (WN-124-003) (Set of 7)
Becker Original Vanes DT/T/VT 3.10/4.10 (WN-124-003) (Set of 7)
Part Number: 90132700007
Becker Original pump vanes # 90132700007 | WN 124-003
For Becker pumps:
• DT / T / VT 3.10
• DT / T / VT 4.10
• T / VT 4.10 DV
Set of 7 carbon vanes
$340.72 /SET
List price: $340.72 /SET
List price: $340.72 /SET
- Vane Dimensions : 55 x 27 x 3mm
- Availability: In stock
Maintenance
• Check for wear every 3,000 hours• Replace vanes once they reach a minimum width of 18mm
• Make sure the beveled edge rides smoothly against the cylinder wall.
• Vane life depends mostly on temperature and vacuum level. Run the pump in an ambient environment with adequate air flow and a max temp. of 100°F.
• Keep dirt and debris off the pump and motor using compressed air every 2000 hours.
• Starting and stopping more than 3 times per hour will deteriorate vane life.
• Run the pump at the lowest acceptable pressure level.
* These intervals are basic guidelines. You may find either more or less frequent attention is needed, depending on your application.
Documents
Vane Check Guide | Maintenance Guide |